Is Aqualux suitable for a Glascon Pool?

A Glascon pool is a little unusual, as it has fibreglass walls and a concrete floor. The construction of this pool is a mix of two styles used for swimming pools – firstly – the wall is made from glass reinforced plastic (commonly known as ‘fibreglass”) and the floor is reinforced concrete.

The fibreglass wall has a smooth gel coat finish and was usually blue in colour, and the concrete floor was either painted or finished with a waterproof marble render. The problem with this system is, there is no chemical bond between the concrete and the fibreglass, so there is a risk of leakage at this joint. If there is some ground movement over time, the joint can open up slightly and pool water will leak out of this join, between the two structural elements.glascon-pool-steps-ready-for-measuring

The simplest and easiest way to fix this leaking, is to install an Aqualux pool finish. The design of the Glascon pool is similar to a prefabricated vinyl pool and therefore it is a very cost effective and straight forward process. The pool has an even wall height all the way around, and the floor slopes down into a bowl sort of shape to make the deep end. Having vertical walls means the vinyl finish will be economical and easy to fit. The pool just needs some simple preparation of new eyeballs fittings suitable for vinyl, a fixing extrusion fitted at the top of the wall and a face plate or under water extrusion around the skimmer opening.

The empty pool is measured for the Aqualux finish, which is made into a one piece waterproof membrane at the factory and then fitted in a day and the pool filled back again with water.

An Aqualux PVC membrane is an excellent solution to a leaking Glascon pool.

glascon-pool-wall-floor-leaking